How to Prevent Materials Stoppage of tube screw conveyor Conveyor
Materials stoppage is the most common failure of tube screw conveyor, which will affect normal production. The precautions of anti-blocking are as follows:
1. Reasonably choose the technical parameters of tube screw conveyor.
2. Strictly carry out the operating norms, to achieve non-load start and stop, as well as to ensure continuous and evenly feeding.
3. Increase outlet size to solve the difficulty in materials discharging. Meanwhile, install short reverse direction screw blade at the tube end closely to outlet, to prevent materials clogging.
4. Clean up the feeding materials to avoid the large impurity of entrance and fiber impurity into tube screw conveyor system pipe. 5. Minimize the lateral dimensions of middle hanger as much as possible to decrease the clogging possibility of theauger conveyor device.
6.Install level detector and clog warning sensor to achieve automatic control and alarm to the auger conveyor.
7.Open an anti-clogging window on the outlet cover plate of theauger conveyor while the stoppage happens, the plugged blocks will break out of the window due to the materials stacking, meanwhile the travel switch will cut off the power.
PKmachinery is a professional tube screw conveyor manufacturer who has been proficient and skilled in the mining machinery field for decades years. PK machinery provide you more professional and practical solution on building your vibrating sieving and conveying machinery system, including solution on system layout, optimal equipment configuration, high-quality equipment,device installation,technical support, considerate pre-sale and after-sale service,etc.
Want to learn more, welcome to visit our website:m.pkmachinery.com